Site Map  |  中文简体 
About Us
Service  

Attentions and Maintenance service
Thanks for choosing our products. In order to avoid unnecessary losses, please read the the followings carefully before using it. If any problems, please call our technology service hot-line, we will try our best to help you.

I. Dealing with the preservative
In order to avoid polluting the display interface, we stick a layer of preservative on our products. Only after the completion of the fitting, you can get rid of the preservative.

II. Installation of interleaver
In order to promote the vibration proof performance and to avoid warping, you'd better to instal an interleaver about 0.1mm and keep the panel flattening.

III. Keep away from static
The circuit of controller and driver of the module is low-voltage and macro-power consumption. All this can be punctured easily. So you must keep it away from the statics.The main attentions are following:
Do not touch the outer lead and the metal frame of the module.
If touching can not be avoided, your body and the module must on the same potential or you should connect to the ground.
 When use the solder iron or other electrical tolls, please keep it connecting to the ground.
Do not use vacuum cleaner to clean the module.
 Be careful when you remove the module from the package and do not the package or throw away the original package optionally.

Copyright © 2007-2010 ddjmlcm.com All Rights Reserved. Shenzhen City DADI Jinmao Industrial Co., Ltd.   Address: Futian District, Shenzhen, Block B Fortune Square, 20N0  
Tel:0755-83173111 83173666 Fax:0755-83173999  Guangdong ICP 09031910

Site Map     Support:Website | zk71  | Manage